F5 301a Real Exam Questions Test Engine Dumps Training With 170 Questions
301a Actual Questions Answers PDF 100% Cover Real Exam Questions
F5 301a exam is a comprehensive test that covers various topics related to BIG-IP LTM solutions, including network components, traffic management, load balancing, virtual servers, and iRules. 301a exam consists of 80 multiple-choice questions that must be answered in 90 minutes. 301a exam is available in English and Japanese and can be taken online or at a Pearson VUE testing center.
NEW QUESTION # 47
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?
- A. SNAT automap enabled
- B. A static SNAT
- C. A SNAT pool with IP address
Explanation
One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough - D. A SNAT pool with 4 IP addresses
Answer: D
NEW QUESTION # 48
The picture belongs to static content, you can configure static content cache in FS to meet this demand.
An LTM Specialist must configure session persistence for a highly available, highly utilized web- based application.
The following requirements are provided:
- http proxy setup for security persistence information available to
the HA peer in case of failover
- The LTM Specialist needs to minimize additional burden on the LTM
device to the greatest extent possible.
Which persistence profile should be used?
- A. Cookie insert
- B. Destination Address Affinity
- C. Source Address Affinity
- D. Universal
Answer: A
NEW QUESTION # 49
Exhibit.
The server team has recently configured the three new DNS servers shown for the data center. No current DNS servers are currently configured on the LTM device.
Which command should be used to configure the LTM device to use the new DNS servers?
- A. tmsh modify/sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
- B. tmsh create/systins name-servers add {192 168.1.2.192.168.100.1O0.192.168.2O0.2OO}
- C. tmsh change /sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
- D. tmsh set/sysdns name-servers add {192.168.2.192.168.100.100.192.168.200.200}
Answer: A
Explanation:
Modify the configuration with modify, and create the configuration with create. Excluding B and D, and the question is to modify the DNS pointer of E5 itself the need to use is modify.
NEW QUESTION # 50
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.90.0.1 and 10.12.0.1
- B. 10.120.0.1 only
- C. 10.100.0.1 and.10.120.0.1
- D. 10.90.0.1 and 10.100.0.1
Answer: C
NEW QUESTION # 51
A VCMP guest has the following characteristics:
- Resources allocated for CPU memory, network interfaces, and disk
space
- Virtual disk created
- The guest is NOT running
The guest is NOT running in which state is the VCMP guest?
- A. Offline
- B. Configured
- C. Provisioned
- D. Deployed
Answer: C
NEW QUESTION # 52
An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting
https://register.example.com to a set of three web servers. Persistence needs to be ensured.
No persistence mirroring is allowed SSL offloading is required. A fourth web server with fewer resources will be used to handle requests from engine bots to
https://register.example.comvrobots.txt by an iRule. The (Rule will use the HTTP_REQUEST event.
What are the required profile and persistence settings to implement this
- A. tcp, clientssl, http. cookie persistence
- B. tcp, clientssl, serverssl, ssl persistence
- C. tcp. dientssl, hup, source address persistence
- D. tcp, clientssl, http, serverssl cookie persistence
Answer: A
Explanation:
The option is wrong, it should be clientssl and serverssl. If the title requires ssl offload instead of encryption, you need clientssl instead of serverssl. irule needs HTTP profile to enable HTTP_REQUT. If the session cannot be mirrored, the cookie session remains to meet the demand.
NEW QUESTION # 53
An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.
Which step should the LTM Specialist take to meet this requirement?
- A. create VLANs for each subnet and set the name accordingly
- B. define active subnets and assign a name to certain subnets
- C. export the report and add the department names manually
- D. use an iRule to change the output of the report
Answer: A
NEW QUESTION # 54
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. ...SECURITY CERTIFICATE....
- B. ...SSL CERTIFICATE....
- C. ...BEGIN CERTIFICATE....
- D. --START CERTIFICATE....
Answer: C
NEW QUESTION # 55
An SSL application is being migrated to the LTM device. Both encrypted and unencrypted traffic are accepted by the server.
The virtual server configuration is as follows:
Which LTM device profile should be used on the LTM device to reduce the CPU load on the current?
- A. clientsssl
- B. serverssl
- C. stream
- D. Protocol
Answer: A
NEW QUESTION # 56
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.50.0.2
- B. 192.168.0.10
- C. 10.20.0.2
- D. 10.20.0.1
Answer: C
NEW QUESTION # 57
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?
- A. SNAT automap enabled
- B. A static SNAT
- C. A SNAT pool with IP address
- D. A SNAT pool with 4 IP addresses
Answer: D
Explanation:
One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough
NEW QUESTION # 58
Refer to the exhibit.
The http monitor is applied to a pool. All members are enabled. One server responds as follows.
What is the resulting status of this poo! member?
- A. Offline (Disabled)
- B. Available (Enabled)
- C. Unavailable (Disabled)
- D. Offline (Enabled)
Answer: D
Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear.
If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).
NEW QUESTION # 59
A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.
Which of the following two tasks must be completed to meet the requirements? (Choose two)
- A. configure the server SSL profile with "Client Certificate" Set to require
- B. generate a CSR to register a certificate with the CA
- C. instruct the desktop team to update the web browser to the most recent release
- D. configure the client SSL profile with the Trusted .Certificate Authorities
- E. configure the client SSL profile with "Client Certificate" set to require
Answer: D,E
NEW QUESTION # 60
An HTTP monitor is created and assigned to a pool with the following non-default configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html
HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close
Receive String: Up
The HTTP server sends the following response:
What is the resulting pool status?
- A. Available (Enabled)
- B. Unknown (Disabled)
- C. Unavailable (Enabled)
- D. Offline (Enabled)
Answer: C
NEW QUESTION # 61
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
- A. SNAT address
- B. SNAT pool
- C. NAT address
- D. NAT pool
Answer: B
NEW QUESTION # 62
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device.
The following is required:
- A new HITP server has been deployed on an LTM device.
- The application running on the server must be monitored by the LIM
device.
The following is required:
- When the server is unavailable, it will send an HTTP status code of
200 in response to a request for the status html page.
- When the server is available, it will send and HTTP status code of
201 in response to a request for the status html page.
- When the 200 status code is received, the pool member should receive
No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- B. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to
201. - C. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to
201. - D. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
Answer: A
NEW QUESTION # 63
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which MOST command enables this behavior?
- A. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
- B. tmsh create sys ha-group External trunks add Externally
- C. tmsh create sys ha-group External trunks add (External (attribute percent up-members 100))
- D. tmsh modify net van External failsafe enabled
Answer: A
NEW QUESTION # 64
An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address. How should the ITM Specialist block the attempts without affecting other users?
- A. Device trust
- B. Port lockdown
- C. SSH IP allow list
- D. Packet filter
Answer: D
NEW QUESTION # 65
An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings.
All support have accounts in the company's Active Directory.
Which method is appropriate to provide access for the support personnel to the BIG-JP device?
- A. configure remote authentication and map support personnel users to the Guest user role
- B. configure remote authentication and map support personnel users to the Operator user role
- C. configure remote authentication for all users with a default user role of Operator
- D. configure remote authentication for all users with a default user role of Guest
Answer: A
NEW QUESTION # 66
......
Exam Topics of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The following will be discussed in this section:
Articulate the characteristics of a pool member that has been disabled or forced offline (Such as for new connections, persisted connections, etc.)
Identify which modules are licensed and/or provisioned U/A
Explain how to create a user U/A
Given a proposed virtual server configuration change, outline the scope of the change and for which connections those changes will affect (active connections, new connections, persisted sessions)
Determine use cases for forcing down a member
Distinguish between disabling a member and forcing it down
Given a description of an application, identify the correct virtual server configured for it (HTTP/HTTPS, TCP/UDP, VLANsenabled, route-domain)
Create and restore a UCS archive under the appropriate circumstances
Establish the frequency of a given issue (random, continuous, isolated, intermittent, repetitive intervals)
Determine use cases for disabling a member
Manage software images
Use BIG-IP tools in order to identify potential performance issues
Explain how to modify user properties
Given a situation where a virtual server configuration change did not appear to immediately take effect, determine why
Differentiate between performance issue types (i.e. Latency, Congestion, broken content)
Given an HA pair, describe the appropriate strategy for deploying a new software image
Recognize when a packet capture is needed within the context of a performance issue
Understand how to get performance statistics in addition to the those shown in the dashboard (Overview - Performance)
Identify which high-level tasks can be automated using BIG-IQ
Understand the processes of licensing, license reactivation, and license modification (add-ons)
TestkingPDF 301a Exam Practice Test Questions: https://passleader.testkingpdf.com/301a-testking-pdf-torrent.html
